Common problems in Stamping Parts processing include deformation and burr of precision stamping parts.  Cracks, warpage, surface scratch and angular deformation of bending parts;  Flange wrinkling, drawing wall wrinkling, drawing wall damage, drawing crack, etc.  Flanging cracks, uneven bulging, etc.

Solutions to common problems: die design should have reasonable clearance value of convex and concave dies, fillet radius, machining accuracy, etc.  When designing bending dies, effective measures should be taken to reduce springback and the amount of springback should be subtracted from the dies.  Reasonable rounded corners are designed to prevent bending crack.  During drawing, a blank holder is used to prevent wrinkling and the pressure should be moderate.  Reduce drawing resistance with proper lubrication to prevent die adhesion or workpiece drawing through;  Use professional stamping oil that meets the process requirements.

The classification of Plastic Injection Parts and the problems needing attention in processing are summarized here. Reasonable arrangement of the process can effectively improve the processing efficiency and reduce the production cost. I hope the above sharing is helpful to everyone.

Stamping Parts are truly understood;  Hardware refers to processed steel or colored parts. Stamping parts refer to steel/colored plate molds formed into specific shapes at room temperature to provide the required pressure for processing. What is the application field of stamping parts?  Next, let's talk briefly.

Application of Stamping Parts:

Stamping in automobile industry.  This is mainly a deep dive.  In our country, this part is mainly concentrated in large independent stamping and drawing factories such as automobile factories, tractor factories and aircraft factories.

Stamping industry for automobiles and other parts.  Mainly punching and shearing.  Many enterprises in this industry are in standard parts factories, and there are also some independent stamping factories. At present, there are many small factories near some automobile factories or tractor factories.

Electric stamping factory.  This kind of factory is a new industry. With the development of electrical appliances, factories in this department are mainly concentrated in the south.

Home appliance parts stamping factory.  These factories emerged after the development of household electrical appliances in our country, mostly distributed in the household electrical enterprises.

Special stamping enterprise.  Aircraft parts stamping and so on belong to this kind of enterprise, but these craft factories also belong to some big factories.

Nbstarlite specializes in supplying all kinds of Plastic Injection Parts. We have a professional team to provide protection for you. Please leave a message if you are interested.

In terms of drawings, machining processes, machining details, etc., the Stamping Parts are produced in strict accordance with the customer's requirements and national processing standards. With the development of such automation technology, it is possible to combine it with traditional machinery and equipment to achieve diverse technological advantages.

First, the processing quality is high, the processing details are diversified and the processing is systematic. Gradually, such processing technology has been upgraded in the course of technological development, increasing its acceptance among customers. In terms of the process and characteristics of the process, the era of automation has been realized.

Secondly, processing costs are reduced, and processing is carried out strictly according to the customer's drawings. When we manufacture Plastic Injection Parts in our factory, we produce them according to customer's requirements or drawings, which is the key to improving the satisfaction of the process and gaining the trust of our customers.